|
-Super high-speed roughing (400-600
IPM)
-Semi-Finishing
techniques
-Bench-free
finishing
-New
programming techniques
-New cutter
technologies
|
-Automated 2D
cutter path programming in one minute
-Super
high-speed programming and drilling techniques
-Boring mill
and gun drill operations
-Automated
feature recognition of "one of a kind" type parts
-New cutter technologies for pocketing,
drilling, finish boring and face milling
|
-Rib cutting
technologies to eliminate EDMing
-Rib cutting
with 1mm diameter cutter up to 32mm deep with very small draft
-Large length
to diameter ratio (30 to 1)
-Techniques
for hard milling up to 64 HRC
-How to
optimize cutter life in very hard materials
-When to rough
hard versus soft
|
-Ideal for
deep cores and cavities
-Programming
and machining of complex parts
-Multi-side
low volume part production...reducing set-up times
-How and when
to optimize cutter angle to the part
-How to
decrease part handling and part setups
|
-High-performance
machining of non-ferrous metals (kirksite and aluminum)
-Super high
metal removal rates in roughing (400-600IPM)
-Improve
efficiencies with new cutter technologies
-Increase
throughput with new programming and cutting techniques
-Optimize 3D
finishing techniques
|
-New cutter
technologies for machining graphite
-Improve cycle
times
-High-speed
high-accuracy cutting techniques
-Cutting for
polish-free electrodes
-Increase tool
life
|
