This wire was developed for wire EDM's with high-power supply. It has a high thermal and electrical conductivity. It consists of two CuZn alloys (brass-on-brass), and is therefore suitable for speed cutting as well as precision contour cutting. It can be used on machines with AWF. Taper cuts (>7) are possible only to a limited extent, except on the following AGIE machine models for which this wire is specified: AC 100D, 200D, 300D; 20, 50, 70 AC Sprint series.
Attributes:
- Base Material: CuZn20
- Coating Material: CuZn50
- Tensile Strength: 115,000 PSI
- Elongation: <3%
- Conductivity: 29%
- Color: Yellow-Brown
Available Diameters and Spools
| INCHES |
0.006 |
0.008 |
0.010 |
0.012 |
0.013 |
| MM |
0.15 |
0.20 |
0.25 |
0.30 |
0.33 |
| Spool Type |
|
|
|
|
|
| DIN100 |
|
|
|
|
|
| DIN160 |
|
|
|
|
|
| DIN200 |
|
|
|
|
|